Leading Process Solutions

Piston insertion sampler

Without fixtures in the material flow

Piston insertion sampler

Sampling from the falling product stream for fine-grained materials, without interfering fixtures in the material stream.

Advantages

  • No disruptive fixtures in the material flow
  • Easy to operate
  • Low maintenance
  • Quick to dismantle
  • Several drive variants
  • Easy to clean

Operating behavior & mechanical features

Piston insertion samplers take a punctual sample from the falling product.

Sampling is carried out using a sample spoon that enters the material flow and fills with sample material after an appropriate waiting time. The sample material is obtained after the sample bucket has been rotated or scraped back. The sample material obtained in this way can be transferred to a pipe socket outside the main pipe.

When retracted, the sampler closes off the material flow via a closing plate attached to the sampling spoon. This keeps the material flow free of fixtures that could obstruct the material flow.

The sample spoon is moved by a pneumatic cylinder or manually.
The term punctual sample is used because only a partial area of the product-bearing cross-section is captured. Despite this partial detection, however, piston samplers can still generate representative samples. This is guaranteed, for example, if the product flow is homogeneous across the cross-section and none of the properties to be analyzed are associated with the particle size. However, if these are dependent on the particle size, we recommend using a sampler that covers the entire cross-section, such as our Downpipe / slurry sampler.

Gallery

Piston insertion sampler
Piston insertion sampler
Kolbeneinsteckprobenehmer
Kolbeneinsteckprobenehmer
Piston insertion sampler
Piston insertion sampler
Screw sampler with electric drive

Screw Sampler

Sampling from the falling product stream for fine-grained materials. Variable sample quantity due to the duration of sampling.

Leer más
Clinker sampler type KPN - Like the piston sampler, the clinker sampler is a sampler that takes a punctual sample from the material flow.

Clinker sampler

Sampling from the falling product stream with separation of fine material.

Leer más
Piston sampler for selective sampling from the material flow

Piston sampler

Sampling from the falling product stream for fine-grained materials. Defined sample quantity for each extraction.

Leer más
Envíe su consulta sobre el producto










    Protección contra spam

    Si se pone en contacto con nosotros a través del formulario de contacto, los datos facilitados se utilizarán exclusivamente para tramitar su solicitud y para cualquier consulta posterior. Encontrará más información sobre el tratamiento de datos en nuestra Protección de datos.

    ¿Cómo podemos ayudarle?

    Tenemos la solución adecuada para cada tarea. Y, si no la tenemos, trabajaremos con usted para encontrar una. ¡Póngase en contacto con nosotros!

    Nuestros especialistas estarán encantados de asesorarle de manera individual, in situ o a distancia, y están a su disposición para responder a cualquier pregunta que pueda tener. Envíenos un mensaje a través de nuestro

    formulario de contacto

    © 2026 - SIEBTECHNIK GmbH
    Escribir correo electrónico Downloads